56009
5600-21
HDPii-Angle-Left-Front-Open7
HDP5000-System-Group2

FARGO HDP 5000 SERİSİ

1 | Puan Ver
KALİTELİ VE EKONOMİK ÇÖZÜMLER

  


HDP 5000 SERİSİ

High Definition Printer/Encoder

RE TARNSFER TEKNOLOJİSİ

YÜKSEK BASKI KALİTESİ YÜKSEK GÜVENLİK PROFESYONEL ÇÖZÜM ÇEŞİTLİ PLASTİK KARTLARA

BASKI YAPABİLME ÖZELLİĞİ FLORASAN BASKI ÖZELLİĞİ

SAATTE YMC RIBBON İLE 95 ADET KART BASKISI

YMCK RIBBON İLE 75 ADET KART BASKISI

Baskı Metodu : HDP®Dye-Sublimation / Resin Thermal Transfer

Çözünürlük : 300 dpi (11.8 dots/mm)

 

Renkler : Up to 16.7 million / 256 shades per pixel

Baskı Ribbon Seçenekleri : Full-color, YMC∗, 750 prints         

Full-color with resin black, YMCK∗, 500 prints

Full-color with two resin black panels, YMCKK∗, 500 prints

Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH∗, 500 prints

Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI∗, 500 prints

Full-color with fluorescing and resin black, YMCFK∗, 500 prints

Premium Resin Black, K∗, 3000 prints

Transfer Film Seçenekleri :  Clear (Approximately 1500 prints) /

Standard Holographic (500 prints) / Custom Holographic, special order (500 prints) / (Clear) with increased durability for producing longer life cards (Approximately 1000 prints)

Kaplama Ribbon Seçenekleri :  Thermal Transfer Overlaminate, .25 mil thick, 500 prints / PolyGuard™ Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size). All overlaminates available in clear, standard holographic design or custom holographic design

Baskı Hızı : Up to 24 seconds per card / 150 cards per hour (YMC with transfer)∗

Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)

Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)∗

Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)∗

Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)∗

Standart Kart Boyutları : CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW)

Baskı Alanı : Over-the-edge on CR-80 cards

Kart Kalınlığı : 030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm

Kart Türleri: ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards, polycarbonate. Note: ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module∗∗∗

Kart Koyma Kapasitesi : 100 cards (.030” / .762mm)

Çıkan Kart Kapasitesi : 200 cards (.030” / .762mm)

Kart Temizleme Merkezi : Replaceable cleaning roller (included with each print ribbon)

Hafıza : 64 MB RAM

Gösterge : User-friendly, SmartScreen™ LCD Control Panel

Yazılım : Windows 10 / 8 / 7 / Vista / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003 R2 / Server 2003 R1 Mac OS X v10.10 / v10.9 / v10.8 / v10.7 / v10.6 and Linux∗∗∗∗

Kodlama Seçenekleri Opsiyonel : Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3.

Desteklenen Erişim Kontrolü Kimlik Bilgileri Kodlama : iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE DESFire® EV1, HID Prox

Arayüz : USB 2.0 and Ethernet with internal print server

Çalışma Sıcaklığı : 65° to 90° F / 18° to 32° C

Nem :  20 - 80% non-condensing

Boyutlar : HDP5000: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD

HDP5000 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD

HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD

HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD

Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD

Ağırlık : HDP5000: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg

HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg

HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg

Sertifikaları : UL, CE, FCC

Çalışma Voltajları : 100-240 VAC, 3.3A max

Besleme Frekansı : 50 Hz / 60 Hz

Garanti : Printer – two years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only) Printhead – two years

Güvenli Malzemeler : FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only HID Secure Materials. HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used.

Seşenekler : 300 dpi • Dual card input hopper module • Card lamination module – single-sided or dual-sided (simultaneous)∗∗∗ • Magnetic stripe encoding • 200-card input hopper • Smart card encoding (contact/contactless) • Dual-sided printing • Physical locks for card hoppers and consumables access • Printer cleaning kit • Secure proprietary consumables system • Custom secure holographic HDP Film and overlaminate • Wi-Fi® Module

Yazılım : FARGO Workbench diagnostic utility with Color Assist spot-color matching

Not : GARANTİ ŞARTLARI ORJİNAL FARGO KART VE SARF MALZEMELERİ KULLANILDIĞINDA GEÇERLİDİR.                                                         

 

Yıldızlar

Friday, 09 January 2015
best
Super User