HDP 5600 SERİSİ YÜKSEK ÇÖZÜNÜRLÜK
High Definition Printer/Encoder
RE TARNSFER TEKNOLOJİSİ
2 YIL GARANTİ
Yeni bir teknoloji ürünü olan HDP 5600 serisi opsiyaonel 600 dpi baskı seçeneğine sahiptir.
64 Mb RAM’e sahip olup saatte 150 adet YMC 124 adet YMCK renkli kart baskısı yapabilir.
Ekonomik Ribbon Seçeneği
Floresan Baskı Seçeneği
İstenildiği zaman Wf-Fi modülü eklenebilir.
Çipli kartların kenarına kadar baskı yapabilir.
600 dpi Baskı Kalitesi (Opsiyonel)
TEKNİK ÖZELLİKLER
Baskı Metodu : HDP® Dye-Sublimation / Resin Thermal Transfer
Çözünürlük : Available in 600 dpi (23.6 dots/mm) or 300 dpi (11.8 dots/mm)
Renkler : Up to 16.7 million / 256 shades per pixel
Baskı Ribbon Seçenekleri : Full-color, YMC∗, 750 prints
Full-color with resin black, YMCK∗, 500 prints
Full-color with two resin black panels, YMCKK∗, 500 prints
Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH∗, 500 prints
Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI∗, 500 prints
Full-color with fluorescing and resin black, YMCFK∗, 500 prints
Full-color with two resin black and inhibit panels for signa ture or other non-printing areas, YMCKIKI∗, 400 prints
Full-color in half panel format with a full resin black panel, Half Panel YMCK∗, 1000 prints
Full-color in half panel with two full resin black panels for producing cards with full-color front and black-only back, Half Panel YMCKK∗, 750 prints
Premium Resin Black, K∗, 3000 prints
Transfer Film Seçenekleri : Clear (Approximately 1500 prints) / Standard Holographic (500 prints) / Custom Holographic, special order (500 prints) / High Durable HDP Film (Clear) with increased durability for producing longer life cards (Approximately 1000 prints)
KaplamaRibbon Seçenekleri : Thermal Transfer Overlaminate, .25 mil thick, 500 prints / PolyGuard™ Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size). All overlaminates available in clear, standard holographic design or custom holographic design
Baskı Hızı∗∗ : Up to 24 seconds per card / 150 cards per hour (YMC with transfer)∗
Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)∗
Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)∗
Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)∗
Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)∗
Standart Kart Boyutları : CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW)
Baskı Alanı : Over-the-edge on CR-80 cards
Kart Kalınlığı : 030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
Kart Türleri : ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards, polycarbonate. Note: ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module∗∗∗
Kart Koyma Kapasitesi : 100 cards (.030” / .762mm)
Çıkan Kart Kapasitesi : 200 cards (.030” / .762mm)
Kart Temizleme Merkezi : Replaceable cleaning roller (included with each print ribbon)
Hafıza : 64 MB RAM
Gösterge : User-friendly, SmartScreen™ LCD Control Panel
Yazılım : Windows 10 / 8 / 7 / Vista / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003 R2 / Server 2003 R1 Mac OS X v10.10 / v10.9 / v10.8 / v10.7 / v10.6 and Linux∗∗∗∗
Kodlama Seçenekleri Opsiyonel : Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3.
Desteklenen Erişim Kontrolü Kimlik Bilgileri Kodlama : iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE DESFire® EV1, HID Prox
Arayüz : USB 2.0 and Ethernet with internal print server
Çalışma Sıcaklığı : 65° to 90° F / 18° to 32° C
Nem : 20 - 80% non-condensing
Boyutlar : HDP5600: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
HDP5600 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
HDP5600 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD
Ağırlık : HDP5600: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg
HDP5600 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg
Sertifikaları : UL, CE, FCC
Çalışma Voltajları : 100-240 VAC, 3.3A max
Besleme Frekansı : 50 Hz / 60 Hz
Garanti : Printer – two years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only) Printhead – two years
Güvenli Malzemeler : FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only HID Secure Materials. HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used.
Seçenekler : 600 dpi • Dual card input hopper module • Card lamination module – single-sided or dual-sided (simultaneous)∗∗∗ • Magnetic stripe encoding • 200-card input hopper • Smart card encoding (contact/contactless) • Dual-sided printing • Physical locks for card hoppers and consumables access • Printer cleaning kit • Secure proprietary consumables system • Custom secure holographic HDP Film and overlaminate • Wi-Fi® Module
Yazılım : FARGO Workbench diagnostic utility with Color Assist spot-color matching
Not : GARANTİ ŞARTLARI ORJİNAL FARGO KART VE SARF MALZEMELERİ KULLANILDIĞINDA GEÇERLİDİR.
goodSuper User